Usb Drive Doesn't Read and Says No Media
Are you faced with the "USB shows No Media in Disk Management" mistake on your computer? This guide volition use "USB shows no media in deejay management" every bit an case to fix related problems and make your storage devices appear and work with your Windows computer normally again without losing any information. Just follow the methods outlined below to prepare your problems.
USB shows no media in Disk Direction
"I can not open the USB flash drive, and it says 'No Media' in Deejay Management. Does anyone know how to resolve this issue?"
"Removable drive, my SanDisk USB pen drive, has a recognition trouble in Windows 10 Disk Management. It's showing No Media so the admission is denied. I accept tons of important photos in information technology, so please help me fix information technology."
Do yous know what the "No Media" error is? When a removable disk is defined as a no media disk, Windows does not recognize it and nigh likely displays the "There is no disk in the drive" mistake in File Explorer. When y'all go to check the drive status in DiskPart, it says "No Media 0 Bytes". Many reasons lead to a USB removable bulldoze not working properly on a estimator, and you demand to exist patient while following the troubleshooting procedures for these issues.
Quick Prepare: Modify USB port to meet if the USB shows normal in Disk Management
When the USB flash drive shows as no media in Deejay Management, you can commencement try to change the USB port and reconnect information technology to your PC from a different USB port.
one. Unplug the USB from your figurer properly.
two. Reconnect the USB flash drive to your PC using a different USB port.
3. Check if Disk Management detects your USB flash drive every bit a normal removable disk.
If the front USB ports did not solve the problem, it might be an insufficient power supply outcome. Try to connect the USB drive to the rear USB port on the computer's motherboard, where the ability supply is much higher.
If the USB still says no media in Disk Management, follow the comprehensive fixes below to resolve your problem.
Complete Fixes for the 'USB Testify No Media in Disk Management' Error
Follow the four steps below to fix your problem:
#1 - Consign/Extract Useful Media Files from the USB Drive That Shows No Media in Deejay Management
To thoroughly scan and find all media files and information on the USB wink bulldoze, we'd recommend you to attempt EaseUS complimentary data recovery software. It specializes in restoring lost files, hidden files, and permanently removed files from Windows PC difficult drives, external hard drives, USB, and other devices in a few clicks.
Step 1. Run USB Information Recovery Software
Connect the USB drive or pen drive to your computer and launch EaseUS USB data recovery software on your PC. Select the drive which is labeled as a External drives, and click "Scan" to start looking for lost files.
Step two. Scan and Search Lost Files on a USB Drive
EaseUS Information Recovery Wizard will thoroughly scan your USB flash bulldoze/pen drive and observe all your lost data on information technology. When the scan process completes, employ the Filter feature to notice wanted files.
Step 3. Restore All Lost Files from USB
A double-click will allow you lot to preview the files. Select the target files to restore and click "Recover" to save them to a secure location on your PC or other external storage devices.
Yous May Also Like:
#2 - Observe Entries of Disconnected Devices in Device Manager and Reconnect the USB to the PC
1. Find entries of disconnected devices in Device Manager
For Windows 10/eight users:
- Click Start and search device managing director, select Device Managing director from the search issue.
- Click View and select Evidence Subconscious Devices, aggrandize all entries by double-clicking them.
- Locate the greyed out devices and right-click on them, select Uninstall.
- Restart your PC.
For Windows vii users:
- Click Showtime and type: cmd, hit Enter.
- Type: set devmgr_show_nonpresent_devices=ane and hitting Enter.
- Type: cd\ and hit Enter.
- Type: cd windows\system32 and striking Enter.
- Blazon: get-go devmgmt.msc and hit Enter.
- Click View and select Show hidden devices, expand all entries, and double-click on them.
- Locate all greyed-out entries, correct-click on each ane of them and select Uninstall.
- Restart your PC.
ii. Reconnect USB to PC
After finding entries of all disconnected devices in Device Managing director, restart your PC and try to reconnect the USB to your PC again. Cheque if the USB shows up in Disk Management. If not, follow the next solution.
#three - Enable USB in Device Manager
1. Right-click the Windows icon and select Device Manager.
2. Locate your USB flash drive under Universal Serial Bus Controller with the proper noun USB Mass Storage.
3. If information technology'due south marked with a red mark or an arrow marking, right-click on it and select Enable.
4. If you can't meet the Enable option, the bulldoze has already been marked.
You lot can go along checking the Deejay Drives in Device Manager to make sure that all drives are enabled as well.
#4 - Modify the USB Bulldoze Letter and Run CHKDSK to Repair USB Errors
i. Change USB drive letter
- Right-click on Computer, select manage, and enter Deejay Management.
- Right-click on the USB flash bulldoze which shows no media there and select Change Bulldoze Alphabetic character and Paths...
- Click Change and click Assign the following bulldoze letter: to ready a new drive letter to your USB wink drive which says no media now on your PC.
- Click OK to ostend the functioning.
two. Run CHKDSK to repair USB errors
- Right-click on the Windows icon and select Command Prompt (Admin).
- Click Yes if the system asks you to sign in as administrator. And sign in with your Administrator account.
- Blazon: chkdsk E: /f /r /x and hit Enter. (Replace Due east: with the bulldoze letter of your USB flash bulldoze.)
EaseUS CleanGenius is a user-friendly calculator fixing tool that is both safe and lightweight. Information technology's a perfect culling to CHKDSK command. Use this 1-click tool to prepare the damaged file system easily.
Step 1. DOWNLOAD EaseUS CleanGenius on your computer and complete the installation.
Stride ii. Run the software. Click "Optimization", and and then choose "File Showing" .
Step 3. Select the drive with a corrupted file organization. Tick the "Bank check and fix file organization error" option and click "Execute".
Step 4. Await the tool performs the repairing task. Later on that, click the "here" button to check the drive.
You lot tin now bank check if the drive shows upwardly equally a regular storage device on your PC.
Conclusion
In the above guide, we have listed the most effective troubleshooting methods for USB no media error in Disk Management, including connecting the flash drive to a new USB port, to the reckoner'south motherboard USB port, uninstall and reinstall the drive in Device Manager, alter the drive letter, and repair USB errors. As you know, there are many other things that can crusade a USB flash drive to malfunction, including physical damage.
If you tried all the troubleshooting methods on this page and your trouble is even so not resolved, consider reading our other tutorials to look for answers to your queries. An case of that would be how to ready a broken USB stick.
People Also Ask About USB No Media Error
If you accept other concerns related to USB shows no media error, cheque out the questions and answers section beneath to find an answer to your concern.
ane. Why does my USB say no media?
"No Media" means the wink memory controller cannot communicate with the NAND wink retention on the drive. Considering of this, it appears to the computer as an empty disk drive. This is usually caused by the NAND flash failing.
This is why that USB appears as No Media on Deejay Direction.
two. How do I ready no media USB?
Hither is a list of all possible means to set up the No Media result on your USB drive:
- Try your USB in another port
- Error-checking tool to fix USB no media
- Update Your media drivers
- Uninstall device commuter to fix at that place is no media in the device
- Change letter of your removable disk to ready no media error
- If you lot plant format option on your Pendrive or memory bill of fare do information technology
- Using chkdsk to fix in that location is no media in the specified device
- Rebuilt MBR Partition using third party tool
- Using attrib command to fix no media USB
- Delete partition and create a new division using disk direction
For a pace-past-step guide, nosotros suggest y'all revert dorsum to the Quick Ready and 4 Complete Fixes on this folio and follow the tutorials there.
3. How practise I open a flash bulldoze that is not recognized?
Stride 1. Connect the USB flash bulldoze to the PC
Step two. Navigate to "Control Panel" > "System" > "Device Managing director" > "Disk drivers".
Step 3. Notice and select your USB device, right-click and outset cull "Uninstall" and then choose "Scan for hardware changes" to refresh the drivers.
Step 4. Restart your estimator.
For more details, please refer to how to Fix USB Flash Drive Not Recognized or Detected.
carterdaithis1970.blogspot.com
Source: https://www.easeus.com/storage-media-recovery/fix-usb-shows-no-media-in-disk-management-error.html
0 Response to "Usb Drive Doesn't Read and Says No Media"
Post a Comment